The 4-in-1 Super Fast Car Charger (120W) resolves cabin cable clutter while delivering simultaneous fast-charging throughput for up to four digital devices. Engineered for ride-share operators and family commuters across Bangladesh, the adapter incorporates two independent spring-loaded mechanical recoil reels housing high-tensile flat ribbon cables extending up to 800 mm. An internal ratcheting cam locks the cables at intermediate extension points; a gentle tug releases the stop-lock to retract the cords into the fire-retardant casing. The internal power architecture utilizes an intelligent step-down buck conversion circuit that manages thermal performance during sustained multi-device charging. The primary Type-C retractable lead supports major fast-charging protocols—including Huawei SuperCharge, Quick Charge 3.0, and USB-PD—delivering up to 66W–100W peak power. The secondary retractable lead provides dedicated 5V/2.4A (up to 20W PD) output engineered for Apple iOS devices. The base incorporates a real-time digital LED voltmeter, providing continuous monitoring of the vehicle's electrical health to prevent battery drainage issues during long idle periods in heavy traffic.

Key Features and Commercial Benefits

● Dual spring-loaded retractable flat cables prevent tangled charging cords across the gear console.

● Combined 120W peak power delivery charges multiple mobile phones and tablets simultaneously.

● High-visibility LED voltmeter monitors battery voltage before engine ignition.

● 180-degree articulating swivel base accommodates recessed center console sockets.

● Multi-point protection matrix guards against over-current, input over-voltage, and short circuits.

Step-by-Step Operating Instructions

1. Inspect the 12V utility socket and remove any accumulated dust or debris.

2. Insert the charging adapter firmly into the socket until the side grounding tabs engage securely and the digital LED voltmeter illuminates.

3. Verify the battery voltage readout: resting voltage should measure between 12.2V and

12.8V; operating voltage with the alternator running should read between 13.6V and 14.6V.

4. Pull the required cable (Type-C or Lightning) smoothly outward until reaching the desired distance, then allow the internal pawl to engage the lock.

5. Connect the terminal to the mobile device to initiate high-speed charging.

6. To retract, gently pull the cable outward roughly 10 mm to disengage the pawl, then guide the terminal smoothly back into its housing seat.

The 4-in-1 Super Fast Car Charger (120W) resolves cabin cable clutter while delivering simultaneous fast-charging throughput for up to four digital devices. Engineered for ride-share operators and family commuters across Bangladesh, the adapter incorporates two independent spring-loaded mechanical recoil reels housing high-tensile flat ribbon cables extending up to 800 mm. An internal ratcheting cam locks the cables at intermediate extension points; a gentle tug releases the stop-lock to retract the cords into the fire-retardant casing. The internal power architecture utilizes an intelligent step-down buck conversion circuit that manages thermal performance during sustained multi-device charging. The primary Type-C retractable lead supports major fast-charging protocols—including Huawei SuperCharge, Quick Charge 3.0, and USB-PD—delivering up to 66W–100W peak power. The secondary retractable lead provides dedicated 5V/2.4A (up to 20W PD) output engineered for Apple iOS devices. The base incorporates a real-time digital LED voltmeter, providing continuous monitoring of the vehicle's electrical health to prevent battery drainage issues during long idle periods in heavy traffic.

Key Features and Commercial Benefits

● Dual spring-loaded retractable flat cables prevent tangled charging cords across the gear console.

● Combined 120W peak power delivery charges multiple mobile phones and tablets simultaneously.

● High-visibility LED voltmeter monitors battery voltage before engine ignition.

● 180-degree articulating swivel base accommodates recessed center console sockets.

● Multi-point protection matrix guards against over-current, input over-voltage, and short circuits.

Step-by-Step Operating Instructions

1. Inspect the 12V utility socket and remove any accumulated dust or debris.

2. Insert the charging adapter firmly into the socket until the side grounding tabs engage securely and the digital LED voltmeter illuminates.

3. Verify the battery voltage readout: resting voltage should measure between 12.2V and

12.8V; operating voltage with the alternator running should read between 13.6V and 14.6V.

4. Pull the required cable (Type-C or Lightning) smoothly outward until reaching the desired distance, then allow the internal pawl to engage the lock.

5. Connect the terminal to the mobile device to initiate high-speed charging.

6. To retract, gently pull the cable outward roughly 10 mm to disengage the pawl, then guide the terminal smoothly back into its housing seat.